Designed for home audio recording, music and sound projects, professional studio applications and live performances. With a rugged all-metal construction, this side-address cardioid studio condenser microphone delivers exceptional detail and low noise. 

Shock mounted and with XLR outputs, the AT2035 is equipped with a switchable 80 Hz high-pass filter to remove unnecessary low-end noise. If you’re wanting to record big voices or big instruments (particularly brass and drums) the 10 dB pad helps prevent the condenser from overloading, meaning the AT2035 handles high sound pressure levels with ease. 

With its high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. The AT2035 also comes equipped with a luxury, leatherette and cushioned protective pouch and a custom shock mount.

Features

• Large diaphragm for smooth, natural sound and low noise

• High SPL handling and wide dynamic range provide unmatched versatility

• Custom shock mount provides superior isolation

• Switchable 80 Hz high-pass filter and 10 dB pad

• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

• Includes custom shock mount & protective pouch

Specifications

Microphones Element- Fixed-charge back plate, permanently polarized condenser

Polar Pattern- Cardioid

Frequency Response- 20 - 20,000 Hz

Low Frequency Roll Off- 80 Hz, 12 dB/octave

Open Circuit Sensitivity- -33 dB (22.4 mV) re 1V at 1 Pa

Maximum Input Sound Level- 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)

Dynamic Range- 136 dB, 1 kHz at Max SPL

Signal-to-Noise Ratio- 82 dB, 1 kHz at 1 Pa

Phantom Power Requirements- 11-52V DC, 3.8 mA typical

Weight- 403g

Dimensions- 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter

Output Connector- Integral 3-pin XLRM-type

Accessories Included- AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch